Facebook Twitter Gplus Pinterest YouTube E-mail RSS
Home Posts tagged "PALS"
formats

Hazard4 – Kato Messenger

Published on July 22, 2014 by in News

Hazard4

When iPads and other electronic devices are used in potentially dangerous, fast-moving situations, there needs to be a way to keep them safe. Part of Hazard 4′s Sidekick collection of small, nimble, modular bags, the Kato is their tablet-carry solution.The Kato’s fast-access, padded and quilted back-pocket cradles the user’s tablet while the other compartments allow the user to store various essential gear.

hazard4-kato

 

Major features of the Kato include a padded panel in the main bay that fits an 11-inch MacBook, a unique 3D flap-pocket with locking-capable zipper-sliders for fast access on the run and two sets of strap D-rings for flap over/under use.

hazard4 kato

 

Features:

  • fast-grab padded/quilted tablet pocket on back
  • padded panel in main bay fits MacBook 11”
  • unique 3-d flap-pocket for fast access on the run
  • 3-d flap-pocket has locking-capable zipper-sliders
  • large velcro panel for i.d.’s, logos, etc. on the front
  • large, locking front-buckle is secure and handy
  • tough-material on flap-edge in the high-use area
  • rubbery, vented handle for a secure wet-grip
  • two sets of strap D-rings for flap over/under use
  • modular MOLLE web field can double capacity
  • flap conceals the gear mounted on the MOLLE
  • large side-pouch w/ MOLLE & accessory-loop
  • zippered side pouch fits a smaller soda bottle
  • access the main bay through unique flap-zipper
  • can be worn as a 3-point chest-pack
  • quilted sides hold & protect DSLR cameras/lenses!
  • vented/MOLLE-topped-pad strap w/ stabilizer

The Kato is available for $99.99 in black, coyote or OD Green, and for $122.45 in ATACS and MultiCam from Hazard4.com

hazard4 kato2

 

News by: killa@operator7airsoft.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Maxpedition – Xantha Backpack

Published on July 18, 2014 by in News, Products

maxpedition logo

The new Xantha Internal Frame Backpack from Maxpedition is built around a polypropylene frame with a single aluminum stay, these packs are lightweight alternatives to the steel framed rucks of the past. On top, you will find a soft-lined sunglasses pouch and a sturdy button lock that secures zipper pulls.

maxpedition xantha

Inside you will find a pouch for 100oz hydration bladder, ports for drinking tubes on both side, and a variety of mesh pockets to organize your gear. On the back, soft and breezy egg crate padding wicks moisture. A padded removable waist belt distributes the load, and handy pouches keep small items close at hand.

maxpedition xantha4

The bottom of the pack is reinforced with Hypalon, and has two nylon loops for bedrolls or compression. This is a comfortable pack for day use, rugged 3 day trips, and anything in between.

maxpedition xantha2

Specs:
• 1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
• Teflon fabric protector for grime resistance and easy maintenance
• High strength zippers and zipper tracks
• UTX-Duraflex nylon buckles for low sound closures
• Triple polyurethane coated for water resistance
• High tensile strength nylon webbing
• High tensile strength composite nylon thread
• AS-100 high grade closed-cell foam padding material for superior shock protection
• Internal seams taped and finished
• Paracord zipper pulls
• Stress points double stitched, Bartacked or “Box-and-X” stitched for added strength

The XANTHA™ Internal Frame Backpack is available in Black,OD Green,Khaki and Foliage for $256.99 from Maxpedition

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Voodoo Tactical Europe – Discreet Raven Pack

Published on June 30, 2014 by in Featured, News, Products

voodoo

The Voodoo Tactical Europe – Discreet Raven Pack is a beautiful pack made of 1000D Nylon Cordura with YKK military coil reversed zippers to keep the dust and dirt out. Adjustable padded harness system with metal ‘D’ ring attachment points, padded removable, adjustable waist belt, padded, molded back panel, double thick, bar-tacked carry handle and two compression straps on each side.

Voodoo Discreet Raven Pack

Main zippered compartment features bladder pocket with center covered hose exit port and both inner panels have full MOLLE webbing for keeping your tactical gear safe on the inside and totally secured.The outside zippered pouch offers full access the length of the pouch and has inside clear window ID holder, hook-n-loop flap covered pocket and hook-n-loop storage pocket. The top zipper on the front of the main compartment offers full length inside access and the lower zipper also offers side-to-side and top to bottom access.

Voodoo Discreet Raven Pack3

Specifications:

  • Measures 11″L x 13″W x 20″H.
  • Weighs 3.52 lbs

Voodoo Discreet Raven Pack2

 

The Voodoo Tactical Europe – Discreet Raven Pack is available in Black and Bronze for €139.95 from voodootactical.eu

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Mayflower – Fixed Shoulder 24H Assault Pack

Published on June 24, 2014 by in News, Products

Mayflower-logo

Mayflower’s Fixed Shoulder 24 Hour Assault Pack is a light weight mission focused back pack built to provide the end user the right size bag to carry the items necessary to conduct 24 hour dismounted operations. It is designed to be used as a stand alone assault pack.

mayflower 24 HOUR ASSAULT PACK

The inside of the pack features a sleeve to carry a hydration bladder and a small cell phone or PDA pocket; the exterior features PALS webbing on the sides. All buckles are ITW-Nexus IR and all workmanship is 100% made in the USA.

mayflower 24 HOUR ASSAULT PACK2

Available in MultiCam, Ranger Green, Coyote Brown, and Black for $145.00 directly from Mayflower-rc.org

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

ATS Tactical Gear – War Belt

Published on June 14, 2014 by in News, Products

ats logo

The ATS War Belt is a padded cover that is designed to be used with a belt system up to 2″ in width. The inside of the War Belt is lined with a strip of 2″ wide hard side (male) Velcro to interface with duty belt soft side (female) Velcro to keep the belt from shifting during hard use. It offers full length 1/4″ high-density, closed cell foam padding for comfort and is lined with Dri-Lex moisture wicking material on the inside of the belt to keep you cooler and manage perspiration. There are 4 ITW/Nexus 1″ Looplocs on the top edge of the belt for using the optional suspenders.

ats-war belt
The outside cover of the War Belt is bar tacked with three stacked rows of PALS webbing for use with any MOLLE compatible pouches. The belt is open along the bottom, allowing access to the inner belt (belt not included). This allows the user to hang pouches, holsters, and drop-leg hangers anywhere along the inner belt. The padded belt is sized to work with our ATS War Belt Liner Belt or Cobra Rigger’s and Legion Belt (Large with Large, etc.).

ats-war belt3

 

As with all ATS products the ATS War Belt is made in the USA and comes with a lifetime guarantee. The ATS War Belt is available in Multicam, Coyote Brown, Ranger Green, ATACS-FG and Black for $42.00 from atstacticalgear.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Strike Industries – Universal Magazine Pouch – UMP

Published on June 13, 2014 by in News, Products

strike industries logo

The (UMP) Universal Magazine Pouch from Strike Industries is designed to be your one stop magazine pouch. This pouch will hold your favorite style of 30 round 5.56, 20 round .308 magazines, like PMAGs or HK magazines. It has been designed to also hold your 7.62, AK magazines and many other combinations including pistol (Single stack or double stack) magazines.

si-ump

Features: 

  • Include modular webbing constructed from 1000 Denier nylon for extra durability.
  • Excellent Quality
  • Attaches to any MOLLE/PALS style webbing with three long MALICE Clips (included)
  • Affordable and effective.
  • Positive retention

si-ump2

 

Possible configuration:

  • 2x.308 + 4x pistol
  • 1x.308 + 2x.223 + 4x pistol
  • 4x.223 + 4xpistol

strikeindustries-ump

 Strike Industries – Universal Magazine Pouch – UMP is available in Black and Flat Dark Earth (FDE) for $29.95 from strikeindustries.com

 

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

PLATATAC – Good To Go (G2G) Pack

Published on June 12, 2014 by in Featured, News, Products

Platatac logo

The Platatac Good To Go (G2G) pack is one of the lightest packs we’ve released to date weighing just 715 grams with straps. Designed as a with a low profile exterior void of any MOLLE it is great in the field, on and off base environments.

PLATATAC-g2gpack

This pack is perfect for a lightweight day pack, small and lightweight so it can be stored in the top of your pack and grabbed out to carry rations and ammo when caching packs. It is also perfect for use as a day-to-day back pack for the carriage of gym clothes, food, documents, 13 inch laptop and other similar sized items

This pack features a generous 26 litre (Approx) zippered compartment containing one mesh pocket and a 3 litre hydration bladder sleave with hook and loop bladder hanger. On top of the pack is a bar-tacked hydration tube/cable routing port.

PLATATAC-g2gpack8

Externally the pack features one zippered pouch for quick access to items such as gloves,  pens, keys, ID, food and ammunition. Externally we have also features a cinch cord system for garments such as the Snugpak Platatac Airpak Jacket.

Furthermore the inclusion of side tensioning straps for when the pack is full to capacity.

The pack has a very small pack size and can fit inside our Alice Pack XL External pockets (with straps detached).

The G2G pack has been constructed from 500/1000 denier Cordura for heavy duty abrasion resistance.  We have utilised lightweight foam sewn in a chevron pattern to provide structure and padding without affecting the ability to fold the pack up for storage.

The heavy duty grab handle has been made from 38mm web tape and has been flag stitched for strength.

All zippers include paracord pulls.

With Echo Pack straps included this pack is truly good to go.

PLATATAC-g2gpack6

Dimensions:

Main pocket: 460mm (H) x 320mm (W) x 180mm(D)

Front pocket 190mm (H) 210mm (W)

Internal mesh pocket 120mm (H) x 23mm (W)

PLATATAC-g2gpack7

Features:

  • 70mm x50mm hook and loop field for IFF, V-Lite ect
  • Reinforced stitched drainage grommet
  • 26 Litre capacity (approx)
  • Mesh Pocket
  • Bar tacking on all major sew points
  • Reversed YKK zippers
  • ITW Nexus Hardware
  • Cordura Nylon
  • MADE IN AUSTRALIA

The PLATATAC – Good To Go (G2G) Pack is available in MultiCam, ATACS FG, ATACS AU, Marine Cam (Platatac Designed), Auscam, Desert Auscam, Olive, Khaki, Tan, Black, Grey, Navy for $179.00 from Platatac.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

TacProGear Black – New HBAV Body Armor Carrier System

Published on June 9, 2014 by in News

TacProGear Logo

DELRAY BEACH, FL (May 2014) – Tacprogear BLACK, the exclusive line of American-made products offered by Tacprogear, unveils their new HBAV body armor carrying system constructed from GRID-HERCULES™ engineered material.

The Tacprogear BLACK HBAV vest design is based on the SPEAR/BALCS shaped platform and is available through Tacprogear BLACK with either FAT approved military fragmentation soft armor inserts or NIJ 0101.06 certified level IIIA soft armor inserts. The HBAV carrier is also designed to hold any of Tacprogear’s new NIJ certified hard armor plates for front and back rifle protection in a variety of sizes, shapes and configurations. The carrier is also designed to be compatible with a variety of tactical accessories, including side armor plates, groin protection, biceps protection and throat and collar protection. The vests are also compatible with MOLLE equipment and other auxiliary components.

TacprogearVests

The HBAV vest is constructed from GRID-HERCULES™ engineered material from Absecon Mills, Inc. The advanced textile fabric is coated with a highly specialized polymer coating that enhances the physical properties of the unit, including impact and abrasion resistance, heat and flame resistance, tear and tensile strength, flame retardation and water resistance.

Tacprogear HBAV

FEATURES:

  • Designed to hold any one of Tacprogear’s new NIJ certifi ed hard armor plates for front and back rifl e protection in a variety of shapes, sizes, and material confi gurations.
  • Flame Retardant
  • Waterproof
  • Compatible with MOLLE equipment and an array of auxiliary components
  • Drag Handle

The Tacprogear BLACK HBAV vest is available in Black, Tan, Coyote Brown and Ranger Green. It will soon be available in MultiCam®, MultiCam® Black and the Kryptek line of camouflage patterns. Available in sizes small to extra-large. Pre-orders are being taken now.
Tacprogear manufactures the HBAV in their new manufacturing facility in Miami, Florida, USA as part of the BLACK line of tactical gear. For more details visit tacprogearblack.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

CPT/Oneiros Valley Practical Admin Pouch

Published on June 3, 2014 by in Featured, News, Products

CPT-Oneros

The Practical Admin Pouch or PAP, a joint effort between Oneiros Valley and Cole Partnerships and Training, designed by firearms instructor Matthew Cole of Cole Partnerships and Training. Designed to be worn front-mounted and centered on a plate carrier, the PAP incorporates a slim, fold-out design that does not interfere with magazine access. Its compact size works equally well on a belt rig or in an ACU cargo pocket.

pap

 

Features and specs:

  • 500 denier Cordura nylon body.
  • Full loop Velcro face, perfect for mounting name tags, IR flags or morale patches.
  • 4 elastic loops: 2 sized for pens/markers and 2 for chemlights.
  • A separate 2″ elastic loop to secure a tourniquet.
  • Ambidextrous access and offset elastic loops that allow markers to be removed and reinserted from the side without opening the pouch.
  • Two inner pockets and a single outer pocket which can house anything from a small notepad right up to a full-size multitool.
  • 3 row and 3 or 4 column PALS profile.
  • Fold-out, removable map insert that is dry erase compatible and can be removed quickly for ease of use or to protect sensitive information.

pap2

 

The PAP is available in coyote brown for $50.00 at OneirosValley.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Orca Arms – Modular Chest Rig

Published on June 2, 2014 by in News, Products

orca arms

Orca Gear Modular Chest Rig is an ultra light platform for mounting a wide variety of pouches, holster and accessories. The Modular Chest Rig is a 7″x19″ flat modular panel with 3×12 rows of PALS webbing across the front. There is spacer mesh fabric sewn against the body side for added breathability and comfort. The Modular Chest Rig comes with fully adjustable shoulder straps and back panel. The Shoulder straps have 3 rows of PALS webbing sewn to each trap and also have spacer mesh fabric sewn to the body side.

Orca Arms - Modular Chest Rig

 

The back panel features a 2″x6″ loop panel for attaching ID patches. Below the loop panel are 2×4 rows of PALS webbing and spacer mesh is seen to the body side. The Modular chest rig also comes with a fully adjustable lower back strap that keeps the chest rig from flopping while in motion. This Modular chest rig can be adjusted to fit over body armor and is low profile enough to be worn and concealed underneath a jacket. Orca Gear Tactical Gear is made with Pluma Vires (P.V.) material. P.V. is a Kevlar laminated material that is 7 to 10 times more abrasion resistant than mil spec Cordura Nylon and products made with P.V. are on an average 20% lighter.

Orca Arms - Modular Chest Rig2

 

The Orca Arms – Modular Chest Rig is available in Black, Coyote Brown, Ranger Green and MultiCam for $95.00 from OrcaArms.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments