Facebook Twitter Gplus Pinterest YouTube E-mail RSS
Home Posts tagged "MOLLE"
formats

Review: Flyye HAWG Hydration Backpack

op7banners

This is another piece of gear any Airsofter should have, not only for load-bearing, but also for hydration purposes. I like the idea of having a backpack that’s able to carry my regular training gear and then being able to convert it to a very lightweight and compact hydration system.

So, as you might have guessed, I use the Flyye HAWG for two purposes: when going out to the field I will fill it with all my Airsoft gear and accessories; and once I get there, I will use it as a hydration system so when I’m playing I can sip some water or some other energy drink and still be able to carry some food and additional tactical gear and accessories.

STORAGE, HYDRATION AND OTHER FEATURES

The HAWG comes with three compartments: a smaller one on the outside just for storage; a larger one which is the main compartment for storage and also for the bladder system; and a third one reserved just for the bladder at the back.

flyee_hawg_review_05

One of the nice things about the HAWG is that you can store the hydration bladder on two of the mentioned compartments. However, in longer games in which I want to take some extra magazines and other metal stuff in the main compartment, I don’t feel comfortable having the hydration bladder near those metallic accessories with pointy edges that might damage or even perforate the bladder.

So I use the third compartment that’s located at the back beneath the padding and is accessed by a zipper. This compartment was specifically designed for this, so you can have more space in the main compartment, where I store some food like a sandwich, energy bars, mags, extra gloves, more bbs, goggles, and my MICH 2000 helmet.

flyee_hawg_review_02

On the smaller outside compartment there are a number of pouches that allow you to store documents, pens and other material. What I mainly use it for is to store extra magazines, extra batteries, optics, and bb loaders.

flyee_hawg_review_03

Depending on the type of game and duration you will need to pack more or less stuff. So if you want to pack light, the backpack can achieve a low profile not protruding out much of your body and helping you remain concealed, and at the same time you can still move around in narrow areas such as corridors, doors or between trees thanks to the external compression straps.

The front of the backpack has MOLLE webbing allowing you to attach additional MOLLE pouches, which greatly increases the potential of this backpack as for load-bearing duties.

flyee_hawg_review_04

In order to fix the hydration tube there are two horizontal guides on each shoulder strap that keep the tube always at hand.

The number of possibilities for which you can setup the hydration system is one of the great features of this backpack — you can either choose to run the bladder on the main compartment or on the back compartment; and you can choose to run the tubing through the left or to the right shoulder strap, depending on what you prefer. This is possible thanks to the two holes on both sides where you can snake through a drinking tube or even comms wiring from the inside of the backpack. These holes can be conveniently sealed by a piece of Velcro attached to the backpack.

I found two more passages right beneath the shoulder straps that can be used to pass the drinking tube out directly from the back compartment however this might get uncomfortable, so I only recommend using these for smaller communications wiring.

From the back compartment there is another hole that allows you to route the drinking tube to the main compartment and out through one of the previously mentioned side holes.

flyee_hawg_review_06

On the main compartment there are internal nylon loops for securing your hydration bladder thus avoiding the bladder from moving around inside the backpack and spilling or rupturing inside.

The recommended bladder size is 2.5 liters, and I would say that the backpack is much similar in size and capacity to be a 12-hour backpack.

The one missing feature I would like seen in this backpack is a Velcro panel for you to put an IFF Patch or any other patch you would want. This, however, can be solved easily by buying a small Velcro panel and either stitching it or attaching it using the MOLLE webbing.

COMFORT

One of the things I most liked about this backpack, apart from the hydration bladder compartment, is the comfort it provides to the operator. This is achieved thanks to the very comfortable and wide shoulder straps that have generous padding and offer great support even on heavier loads.

The YKK zipper pullers are very well thought-out, since they are big and make opening the compartments a lot easier when using gloves, which I often do during a game.

Another much appreciated feature is the two quick release buckles on each shoulder strap that allow you to easily drop the whole backpack without the awkwardness of having to remove each of the straps and thus having to put your weapon aside.

flyee_hawg_review_07

When hiking or running you might want to minimize the wobble that the backpack might do so you can use the sternum and waist straps included that provide increased support and comfort and prevent the backpack from sliding away from the shoulders. When I tried both straps on, I noticed the backpack adapts perfectly to my body and helps me running and bearing its weight, for example, when climbing a rocky slope.

Another thing I noticed is how my back feels great after using the backpack for one day even with some hard objects inside. Thanks to the padding, it creates a protective barrier that cushions and absorbs the impact from the objects inside the backpack, and it also eliminates the irregularities that those objects can cause to the shape of the backpack that is in contact with my back.

Another thing worth mentioning is how light and small the backpack can be especially when you want to run it only has hydration system. It compares quite well with especially dedicated hydration carriers and offers much greater options.

So comfort-wise I must say I am very satisfied with the HAWG.

flyee_hawg_review_08

QUALITY

The HAWG has everything to be tough and wear resistant: the whole backpack is made according to military specifications and Flyye used Invista 1000D Cordura Nylon, which can be 300% times more resistant to the usual wear and tear than normal Nylon.

The Duraflex plastics ensure buckle quality and durability and are also Mil-Spec. The Velcro along with Military specification nylon sewing put together a backpack that will last for years.

This backpack is water resistant so you can use it in snowy or rainy conditions and all the material and food stored on the inside will be protected from the elements. However,  in case a bladder might burst or any liquid should spill, the backpack will drain the liquid thanks to a couple of drainage holes at the bottom.

This is what you should look for in a backpack for Airsoft, and from my incursions in the field with the HAWG I can say it lives up to the specs and quality that Flyye wanted this backpack to have.

flyee_hawg_review_09

CONCLUSION

This is a very complete solution that allows for many options and will fit most Airsofters, and that you can also use on a daily basis or even for hiking and adventure holidays.

It’s a great choice whether you are looking for ways to keep yourself hydrated during those hot summer games or if you already own a hydration carrier but don’t have a decent backpack that can take your gear and withstand some abuse.

For me it has become an inseparable piece of equipment every time I go to the field!

Pros

  • Quality of the materials
  • Very comfortable
  • Flexible
  • Numerous hydration and load bearing options

Cons

  • No Velcro for Patches

I would like to thank Bob from Flyye that made this review possible through their dealer Military1st. For more information on this backpack or if you are interested in purchasing it visit Flyye’s official dealer Military1st.co.uk.

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Hazard4 – Kato Messenger

Published on July 22, 2014 by in News

Hazard4

When iPads and other electronic devices are used in potentially dangerous, fast-moving situations, there needs to be a way to keep them safe. Part of Hazard 4′s Sidekick collection of small, nimble, modular bags, the Kato is their tablet-carry solution.The Kato’s fast-access, padded and quilted back-pocket cradles the user’s tablet while the other compartments allow the user to store various essential gear.

hazard4-kato

 

Major features of the Kato include a padded panel in the main bay that fits an 11-inch MacBook, a unique 3D flap-pocket with locking-capable zipper-sliders for fast access on the run and two sets of strap D-rings for flap over/under use.

hazard4 kato

 

Features:

  • fast-grab padded/quilted tablet pocket on back
  • padded panel in main bay fits MacBook 11”
  • unique 3-d flap-pocket for fast access on the run
  • 3-d flap-pocket has locking-capable zipper-sliders
  • large velcro panel for i.d.’s, logos, etc. on the front
  • large, locking front-buckle is secure and handy
  • tough-material on flap-edge in the high-use area
  • rubbery, vented handle for a secure wet-grip
  • two sets of strap D-rings for flap over/under use
  • modular MOLLE web field can double capacity
  • flap conceals the gear mounted on the MOLLE
  • large side-pouch w/ MOLLE & accessory-loop
  • zippered side pouch fits a smaller soda bottle
  • access the main bay through unique flap-zipper
  • can be worn as a 3-point chest-pack
  • quilted sides hold & protect DSLR cameras/lenses!
  • vented/MOLLE-topped-pad strap w/ stabilizer

The Kato is available for $99.99 in black, coyote or OD Green, and for $122.45 in ATACS and MultiCam from Hazard4.com

hazard4 kato2

 

News by: killa@operator7airsoft.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Maxpedition – Xantha Backpack

Published on July 18, 2014 by in News, Products

maxpedition logo

The new Xantha Internal Frame Backpack from Maxpedition is built around a polypropylene frame with a single aluminum stay, these packs are lightweight alternatives to the steel framed rucks of the past. On top, you will find a soft-lined sunglasses pouch and a sturdy button lock that secures zipper pulls.

maxpedition xantha

Inside you will find a pouch for 100oz hydration bladder, ports for drinking tubes on both side, and a variety of mesh pockets to organize your gear. On the back, soft and breezy egg crate padding wicks moisture. A padded removable waist belt distributes the load, and handy pouches keep small items close at hand.

maxpedition xantha4

The bottom of the pack is reinforced with Hypalon, and has two nylon loops for bedrolls or compression. This is a comfortable pack for day use, rugged 3 day trips, and anything in between.

maxpedition xantha2

Specs:
• 1000-Denier water and abrasion resistant light-weight ballistic nylon fabric
• Teflon fabric protector for grime resistance and easy maintenance
• High strength zippers and zipper tracks
• UTX-Duraflex nylon buckles for low sound closures
• Triple polyurethane coated for water resistance
• High tensile strength nylon webbing
• High tensile strength composite nylon thread
• AS-100 high grade closed-cell foam padding material for superior shock protection
• Internal seams taped and finished
• Paracord zipper pulls
• Stress points double stitched, Bartacked or “Box-and-X” stitched for added strength

The XANTHA™ Internal Frame Backpack is available in Black,OD Green,Khaki and Foliage for $256.99 from Maxpedition

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Voodoo Tactical Europe – Discreet Raven Pack

Published on June 30, 2014 by in Featured, News, Products

voodoo

The Voodoo Tactical Europe – Discreet Raven Pack is a beautiful pack made of 1000D Nylon Cordura with YKK military coil reversed zippers to keep the dust and dirt out. Adjustable padded harness system with metal ‘D’ ring attachment points, padded removable, adjustable waist belt, padded, molded back panel, double thick, bar-tacked carry handle and two compression straps on each side.

Voodoo Discreet Raven Pack

Main zippered compartment features bladder pocket with center covered hose exit port and both inner panels have full MOLLE webbing for keeping your tactical gear safe on the inside and totally secured.The outside zippered pouch offers full access the length of the pouch and has inside clear window ID holder, hook-n-loop flap covered pocket and hook-n-loop storage pocket. The top zipper on the front of the main compartment offers full length inside access and the lower zipper also offers side-to-side and top to bottom access.

Voodoo Discreet Raven Pack3

Specifications:

  • Measures 11″L x 13″W x 20″H.
  • Weighs 3.52 lbs

Voodoo Discreet Raven Pack2

 

The Voodoo Tactical Europe – Discreet Raven Pack is available in Black and Bronze for €139.95 from voodootactical.eu

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Mayflower – Fixed Shoulder 24H Assault Pack

Published on June 24, 2014 by in News, Products

Mayflower-logo

Mayflower’s Fixed Shoulder 24 Hour Assault Pack is a light weight mission focused back pack built to provide the end user the right size bag to carry the items necessary to conduct 24 hour dismounted operations. It is designed to be used as a stand alone assault pack.

mayflower 24 HOUR ASSAULT PACK

The inside of the pack features a sleeve to carry a hydration bladder and a small cell phone or PDA pocket; the exterior features PALS webbing on the sides. All buckles are ITW-Nexus IR and all workmanship is 100% made in the USA.

mayflower 24 HOUR ASSAULT PACK2

Available in MultiCam, Ranger Green, Coyote Brown, and Black for $145.00 directly from Mayflower-rc.org

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

ATS Tactical Gear – War Belt

Published on June 14, 2014 by in News, Products

ats logo

The ATS War Belt is a padded cover that is designed to be used with a belt system up to 2″ in width. The inside of the War Belt is lined with a strip of 2″ wide hard side (male) Velcro to interface with duty belt soft side (female) Velcro to keep the belt from shifting during hard use. It offers full length 1/4″ high-density, closed cell foam padding for comfort and is lined with Dri-Lex moisture wicking material on the inside of the belt to keep you cooler and manage perspiration. There are 4 ITW/Nexus 1″ Looplocs on the top edge of the belt for using the optional suspenders.

ats-war belt
The outside cover of the War Belt is bar tacked with three stacked rows of PALS webbing for use with any MOLLE compatible pouches. The belt is open along the bottom, allowing access to the inner belt (belt not included). This allows the user to hang pouches, holsters, and drop-leg hangers anywhere along the inner belt. The padded belt is sized to work with our ATS War Belt Liner Belt or Cobra Rigger’s and Legion Belt (Large with Large, etc.).

ats-war belt3

 

As with all ATS products the ATS War Belt is made in the USA and comes with a lifetime guarantee. The ATS War Belt is available in Multicam, Coyote Brown, Ranger Green, ATACS-FG and Black for $42.00 from atstacticalgear.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

Strike Industries – Universal Magazine Pouch – UMP

Published on June 13, 2014 by in News, Products

strike industries logo

The (UMP) Universal Magazine Pouch from Strike Industries is designed to be your one stop magazine pouch. This pouch will hold your favorite style of 30 round 5.56, 20 round .308 magazines, like PMAGs or HK magazines. It has been designed to also hold your 7.62, AK magazines and many other combinations including pistol (Single stack or double stack) magazines.

si-ump

Features: 

  • Include modular webbing constructed from 1000 Denier nylon for extra durability.
  • Excellent Quality
  • Attaches to any MOLLE/PALS style webbing with three long MALICE Clips (included)
  • Affordable and effective.
  • Positive retention

si-ump2

 

Possible configuration:

  • 2x.308 + 4x pistol
  • 1x.308 + 2x.223 + 4x pistol
  • 4x.223 + 4xpistol

strikeindustries-ump

 Strike Industries – Universal Magazine Pouch – UMP is available in Black and Flat Dark Earth (FDE) for $29.95 from strikeindustries.com

 

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

PLATATAC – Good To Go (G2G) Pack

Published on June 12, 2014 by in Featured, News, Products

Platatac logo

The Platatac Good To Go (G2G) pack is one of the lightest packs we’ve released to date weighing just 715 grams with straps. Designed as a with a low profile exterior void of any MOLLE it is great in the field, on and off base environments.

PLATATAC-g2gpack

This pack is perfect for a lightweight day pack, small and lightweight so it can be stored in the top of your pack and grabbed out to carry rations and ammo when caching packs. It is also perfect for use as a day-to-day back pack for the carriage of gym clothes, food, documents, 13 inch laptop and other similar sized items

This pack features a generous 26 litre (Approx) zippered compartment containing one mesh pocket and a 3 litre hydration bladder sleave with hook and loop bladder hanger. On top of the pack is a bar-tacked hydration tube/cable routing port.

PLATATAC-g2gpack8

Externally the pack features one zippered pouch for quick access to items such as gloves,  pens, keys, ID, food and ammunition. Externally we have also features a cinch cord system for garments such as the Snugpak Platatac Airpak Jacket.

Furthermore the inclusion of side tensioning straps for when the pack is full to capacity.

The pack has a very small pack size and can fit inside our Alice Pack XL External pockets (with straps detached).

The G2G pack has been constructed from 500/1000 denier Cordura for heavy duty abrasion resistance.  We have utilised lightweight foam sewn in a chevron pattern to provide structure and padding without affecting the ability to fold the pack up for storage.

The heavy duty grab handle has been made from 38mm web tape and has been flag stitched for strength.

All zippers include paracord pulls.

With Echo Pack straps included this pack is truly good to go.

PLATATAC-g2gpack6

Dimensions:

Main pocket: 460mm (H) x 320mm (W) x 180mm(D)

Front pocket 190mm (H) 210mm (W)

Internal mesh pocket 120mm (H) x 23mm (W)

PLATATAC-g2gpack7

Features:

  • 70mm x50mm hook and loop field for IFF, V-Lite ect
  • Reinforced stitched drainage grommet
  • 26 Litre capacity (approx)
  • Mesh Pocket
  • Bar tacking on all major sew points
  • Reversed YKK zippers
  • ITW Nexus Hardware
  • Cordura Nylon
  • MADE IN AUSTRALIA

The PLATATAC – Good To Go (G2G) Pack is available in MultiCam, ATACS FG, ATACS AU, Marine Cam (Platatac Designed), Auscam, Desert Auscam, Olive, Khaki, Tan, Black, Grey, Navy for $179.00 from Platatac.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

TacProGear Black – New HBAV Body Armor Carrier System

Published on June 9, 2014 by in News

TacProGear Logo

DELRAY BEACH, FL (May 2014) – Tacprogear BLACK, the exclusive line of American-made products offered by Tacprogear, unveils their new HBAV body armor carrying system constructed from GRID-HERCULES™ engineered material.

The Tacprogear BLACK HBAV vest design is based on the SPEAR/BALCS shaped platform and is available through Tacprogear BLACK with either FAT approved military fragmentation soft armor inserts or NIJ 0101.06 certified level IIIA soft armor inserts. The HBAV carrier is also designed to hold any of Tacprogear’s new NIJ certified hard armor plates for front and back rifle protection in a variety of sizes, shapes and configurations. The carrier is also designed to be compatible with a variety of tactical accessories, including side armor plates, groin protection, biceps protection and throat and collar protection. The vests are also compatible with MOLLE equipment and other auxiliary components.

TacprogearVests

The HBAV vest is constructed from GRID-HERCULES™ engineered material from Absecon Mills, Inc. The advanced textile fabric is coated with a highly specialized polymer coating that enhances the physical properties of the unit, including impact and abrasion resistance, heat and flame resistance, tear and tensile strength, flame retardation and water resistance.

Tacprogear HBAV

FEATURES:

  • Designed to hold any one of Tacprogear’s new NIJ certifi ed hard armor plates for front and back rifl e protection in a variety of shapes, sizes, and material confi gurations.
  • Flame Retardant
  • Waterproof
  • Compatible with MOLLE equipment and an array of auxiliary components
  • Drag Handle

The Tacprogear BLACK HBAV vest is available in Black, Tan, Coyote Brown and Ranger Green. It will soon be available in MultiCam®, MultiCam® Black and the Kryptek line of camouflage patterns. Available in sizes small to extra-large. Pre-orders are being taken now.
Tacprogear manufactures the HBAV in their new manufacturing facility in Miami, Florida, USA as part of the BLACK line of tactical gear. For more details visit tacprogearblack.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments 
formats

CPT/Oneiros Valley Practical Admin Pouch

Published on June 3, 2014 by in Featured, News, Products

CPT-Oneros

The Practical Admin Pouch or PAP, a joint effort between Oneiros Valley and Cole Partnerships and Training, designed by firearms instructor Matthew Cole of Cole Partnerships and Training. Designed to be worn front-mounted and centered on a plate carrier, the PAP incorporates a slim, fold-out design that does not interfere with magazine access. Its compact size works equally well on a belt rig or in an ACU cargo pocket.

pap

 

Features and specs:

  • 500 denier Cordura nylon body.
  • Full loop Velcro face, perfect for mounting name tags, IR flags or morale patches.
  • 4 elastic loops: 2 sized for pens/markers and 2 for chemlights.
  • A separate 2″ elastic loop to secure a tourniquet.
  • Ambidextrous access and offset elastic loops that allow markers to be removed and reinserted from the side without opening the pouch.
  • Two inner pockets and a single outer pocket which can house anything from a small notepad right up to a full-size multitool.
  • 3 row and 3 or 4 column PALS profile.
  • Fold-out, removable map insert that is dry erase compatible and can be removed quickly for ease of use or to protect sensitive information.

pap2

 

The PAP is available in coyote brown for $50.00 at OneirosValley.com

 
 Share on Facebook Share on Twitter Share on Reddit Share on LinkedIn
No Comments  comments